KNOWPIA
WELCOME TO KNOWPIA

In quantum information theory, a **quantum circuit** is a model for quantum computation, similar to classic circuits, in which a computation is a sequence of quantum gates, measurements, initializations of qubits to known values, and possibly other actions. The minimum set of actions that a circuit needs to be able to perform on the qubits to enable quantum computation is known as DiVincenzo's criteria.

Circuits are written such that the horizontal axis is time. The circuit start at the left hand side, and end at the right. Horizontal lines are qubits, doubled lines represent classical bits. The items that are connected to these lines are operations performed on the qubits, such as measurements or gates. These lines define the sequence of events, and are usually not physical cables.^{[2]}^{[3]}^{[4]}

The graphical depiction of quantum circuit elements is described using a variant of the Penrose graphical notation.^{[citation needed]} Richard Feynman used an early version of the quantum circuit notation in 1986.^{[5]}

Most elementary logic gates of a classical computer are not reversible. Thus, for instance, for an AND gate one cannot always recover the two input bits from the output bit; for example, if the output bit is 0, we cannot tell from this whether the input bits are 01 or 10 or 00.

However, reversible gates in classical computers are easily constructed for bit strings of any length; moreover, these are actually of practical interest, since irreversible gates must always increase physical entropy. A reversible gate is a reversible function on *n*-bit data that returns *n*-bit data, where an *n*-bit data is a string of bits *x*_{1},*x*_{2}, ...,*x*_{n} of length *n*. The set of *n*-bit data is the space {0,1}^{n}, which consists of 2^{n} strings of 0's and 1's.

More precisely: an *n*-bit reversible gate is a bijective mapping *f* from the set {0,1}^{n} of *n*-bit data onto itself.
An example of such a reversible gate *f* is a mapping that applies a fixed permutation to its inputs.
For reasons of practical engineering, one typically studies gates only for small values of *n*, e.g. *n*=1, *n*=2 or *n*=3. These gates can be easily described by tables.

The quantum logic gates are reversible unitary transformations on at least one qubit. Multiple qubits taken together are referred to as quantum registers. To define quantum gates, we first need to specify the quantum replacement of an *n*-bit datum. The *quantized version* of classical *n*-bit space {0,1}^{n} is the Hilbert space

This is by definition the space of complex-valued functions on {0,1}^{n} and is naturally an inner product space. refers to the 2-norm. This space can also be regarded as consisting of linear combinations, or superpositions, of classical bit strings. Note that *H*_{QB(n)} is a vector space over the complex numbers of dimension 2^{n}. The elements of this space are *n*-qubit quantum registers.

Using Dirac ket notation, if *x*_{1},*x*_{2}, ...,*x*_{n} is a classical bit string, then

is a special *n*-qubit register corresponding to the function which maps this classical bit string to 1 and maps all other bit strings to 0; these 2^{n} special *n*-qubit registers are called *computational basis states*. All *n*-qubit registers are complex linear combinations of these computational basis states.

Quantum logic gates, in contrast to classical logic gates, are always reversible. One requires a special kind of reversible function, namely a unitary mapping, that is, a linear transformation of a complex inner product space that preserves the Hermitian inner product. An *n*-qubit (reversible) quantum gate is a unitary mapping *U* from the space *H*_{QB(n)} of *n*-qubit registers onto itself.

Typically, we are only interested in gates for small values of *n*.

A reversible *n*-bit classical logic gate gives rise to a reversible *n*-bit quantum gate as follows: to each reversible *n*-bit logic gate *f* corresponds a quantum gate *W*_{f} defined as follows:

Note that *W*_{f} permutes the computational basis states.

Of particular importance is the controlled NOT gate (also called CNOT gate) *W*_{CNOT} defined on a quantized 2 qubit. Other examples of quantum logic gates derived from classical ones are the Toffoli gate and the Fredkin gate.

However, the Hilbert-space structure of the qubits permits many quantum gates that are not induced by classical ones. For example, a relative phase shift is a 1 qubit gate given by multiplication by the phase shift operator:

so

Again, we consider first *reversible* classical computation. Conceptually, there is no difference between a reversible *n*-bit circuit and a reversible *n*-bit logic gate: either one is just an invertible function on the space of *n* bit data. However, as mentioned in the previous section, for engineering reasons we would like to have a small number of simple reversible gates, that can be put together to assemble any reversible circuit.

To explain this assembly process, suppose we have a reversible *n*-bit gate *f* and a reversible *m*-bit gate *g*. Putting them together means producing a new circuit by connecting some set of *k* outputs of *f* to some set of *k* inputs of *g* as in the figure below. In that figure, *n*=5, *k*=3 and *m*=7. The resulting circuit is also reversible and operates on *n*+*m*−*k* bits.

We will refer to this scheme as a *classical assemblage* (This concept corresponds to a technical definition in Kitaev's pioneering paper cited below). In composing these reversible machines, it is important to ensure that the intermediate machines are also reversible. This condition assures that *intermediate* "garbage" is not created (the net physical effect would be to increase entropy, which is one of the motivations for going through this exercise).

Note that each horizontal line on the above picture represents either 0 or 1, not these probabilities. Since quantum computations are reversible, at each 'step' the number of lines must be the same number of input lines. Also, each input combination must be mapped to a single combination at each 'step'. This means that each intermediate combination in a quantum circuit is a bijective function of the input.^{[6]}

Now it is possible to show that the Toffoli gate is a universal gate. This means that given any reversible classical *n*-bit circuit *h*, we can construct a classical assemblage of Toffoli gates in the above manner to produce an (*n*+*m*)-bit circuit *f* such that

where there are *m* underbraced zeroed inputs and

- .

Notice that the end result always has a string of *m* zeros as the ancilla bits. No "rubbish" is ever produced, and so this computation is indeed one that, in a physical sense, generates no entropy. This issue is carefully discussed in Kitaev's article.

More generally, any function *f* (bijective or not) can be simulated by a circuit of Toffoli gates. Obviously, if the mapping fails to be injective, at some point in the simulation (for example as the last step) some "garbage" has to be produced.

For quantum circuits a similar composition of qubit gates can be defined. That is, associated to any *classical assemblage* as above, we can produce a reversible quantum circuit when in place of *f* we have an *n*-qubit gate *U* and in place of *g* we have an *m*-qubit gate *W*. See illustration below:

The fact that connecting gates this way gives rise to a unitary mapping on *n*+*m*−*k* qubit space is easy to check. In a real quantum computer the physical connection between the gates is a major engineering challenge, since it is one of the places where decoherence may occur.

There are also universality theorems for certain sets of well-known gates; such a universality theorem exists, for instance, for the pair consisting of the single qubit phase gate *U*_{θ} mentioned above (for a suitable value of θ), together with the 2-qubit CNOT gate *W*_{CNOT}. However, the universality theorem for the quantum case is somewhat weaker than the one for the classical case; it asserts only that any reversible *n*-qubit circuit can be *approximated* arbitrarily well by circuits assembled from these two elementary gates. Note that there are uncountably many possible single qubit phase gates, one for every possible angle θ, so they cannot all be represented by a finite circuit constructed from {*U*_{θ}, *W*_{CNOT}}.

So far we have not shown how quantum circuits are used to perform computations. Since many important numerical problems reduce to computing a unitary transformation *U* on a finite-dimensional space (the celebrated discrete Fourier transform
being a prime example), one might expect that some quantum circuit could be designed to carry out the transformation *U*. In principle, one needs only to prepare an *n* qubit state ψ as an appropriate superposition of computational basis states for the input and measure the output *U*ψ. Unfortunately, there are two problems with this:

- One cannot measure the phase of ψ at any computational basis state so there is no way of reading out the complete answer. This is in the nature of measurement in quantum mechanics.
- There is no way to efficiently prepare the input state ψ.

This does not prevent quantum circuits for the discrete Fourier transform from being used as intermediate steps in other quantum circuits, but the use is more subtle. In fact quantum computations are *probabilistic*.

We now provide a mathematical model for how quantum circuits can simulate
*probabilistic* but classical computations. Consider an *r*-qubit circuit *U* with
register space *H*_{QB(r)}. *U* is thus a unitary map

In order to associate this circuit to a classical mapping on bitstrings, we specify

- An
*input register**X*= {0,1}^{m}of*m*(classical) bits. - An
*output register**Y*= {0,1}^{n}of*n*(classical) bits.

The contents *x* = *x*_{1}, ..., *x*_{m} of
the classical input register are used to initialize the qubit
register in some way. Ideally, this would be done with the computational basis
state

where there are *r*-*m* underbraced zeroed inputs. Nevertheless,
this perfect initialization is completely unrealistic. Let us assume
therefore that the initialization is a mixed state given by some density operator *S* which is near the idealized input in some appropriate metric, e.g.

Similarly, the output register space is related to the qubit register, by a *Y*
valued observable *A*. Note that observables in quantum mechanics are usually defined in
terms of *projection valued measures* on **R**; if the variable
happens to be discrete, the projection valued measure reduces to a
family {E_{λ}} indexed on some parameter λ
ranging over a countable set. Similarly, a *Y* valued observable,
can be associated with a family of pairwise orthogonal projections
{E_{y}} indexed by elements of *Y*. such that

Given a mixed state *S*, there corresponds a probability measure on *Y*
given by

The function *F*:*X* → *Y* is computed by a circuit
*U*:*H*_{QB(r)} → *H*_{QB(r)} to within ε if and only if
for all bitstrings *x* of length *m*

Now

so that

**Theorem**. If ε + δ < 1/2, then the probability distribution

on *Y* can be used to determine *F*(*x*) with an arbitrarily small probability of error by majority sampling, for a sufficiently large sample size. Specifically, take *k* independent samples from the probability distribution Pr on *Y* and choose a value on which more than half of the samples agree. The probability that the value *F*(*x*) is sampled more than *k*/2 times is at least

where γ = 1/2 - ε - δ.

This follows by applying the Chernoff bound.

Wikimedia Commons has media related to Quantum circuit. |

**^**Nielsen, Michael A.; Chuang, Isaac (2010).*Quantum Computation and Quantum Information*. Cambridge: Cambridge University Press. pp. 26–28. ISBN 978-1-10700-217-3. OCLC 43641333.**^**Colin P. Williams (2011).*Explorations in Quantum Computing*. Springer. pp. 123–200. ISBN 978-1-84628-887-6.**^**Nielsen, Michael A.; Chuang, Isaac (2010).*Quantum Computation and Quantum Information*. Cambridge: Cambridge University Press. pp. 171–215. ISBN 978-1-10700-217-3. OCLC 43641333.**^**Ömer, Bernhard (2000-01-20).*Quantum Programming in QCL*(PDF) (Thesis). Institute for Theoretical Physics, Vienna University of Technology. pp. 37–38. Retrieved 2021-10-12.**^**Feynman, Richard P. (1986). "Quantum mechanical computers".*Foundations of Physics*. Springer Science and Business Media LLC.**16**(6): 507–531. doi:10.1007/bf01886518. ISSN 0015-9018.**^**"Introduction to the Quantum Circuit Model" (PDF).

- Biham, Eli; Brassard, Gilles; Kenigsberg, Dan; Mor, Tal (2004), "Quantum computing without entanglement",
*Theoretical Computer Science*,**320**(1): 15–33, arXiv:quant-ph/0306182, doi:10.1016/j.tcs.2004.03.041, MR 2060181. - Freedman, Michael H.; Kitaev, Alexei; Larsen, Michael J.; Wang, Zhenghan (2003), "Topological quantum computation",
*Bulletin of the American Mathematical Society*,**40**(1): 31–38, arXiv:quant-ph/0101025, doi:10.1090/S0273-0979-02-00964-3, MR 1943131. - Hirvensalo, Mika (2001),
*Quantum Computing*, Natural Computing Series, Berlin: Springer-Verlag, ISBN 3-540-66783-0, MR 1931238. - Kitaev, A. Yu. (1997), "Quantum computations: algorithms and error correction",
*Uspekhi Mat. Nauk*(in Russian),**52**(6(318)): 53–112, Bibcode:1997RuMaS..52.1191K, doi:10.1070/RM1997v052n06ABEH002155, MR 1611329. - Nielsen, Michael A.; Chuang, Isaac L. (2000),
*Quantum Computation and Quantum Information*, Cambridge: Cambridge University Press, ISBN 0-521-63235-8, MR 1796805.

- Q-circuit is a macro package for drawing quantum circuit diagrams in LaTeX.
- Quantum Circuit Simulator (Davy Wybiral) a browser-based quantum circuit diagram editor and simulator.
- Quantum Computing Playground a browser-based quantum scripting environment.
- Quirk - Quantum Circuit Toy a browser-based quantum circuit diagram editor and simulator.